Quick Reference Guide - Sharp FO-DC500 Facsimile Operation Manual

QUICK REFERENCE GUIDE

SENDING FAXES
Place the document (up to
50 A4-size pages) face
down in the document
feeder.
(Note: For Normal Dialling and Direct Keypad
Dialling, you can also load the document after
dialling the number.)
RESOLUTION
Press or
Normal Dialling
1. Lift extension phone or press
2. Dial the fax number (if using an extension
phone, dial on the extension phone keypad).
3. Wait for the reception tone (if a person
answers, ask them to press their Start key).
START/
4. Press .
ENTER
Rapid Key Dialling
Press the desired Rapid Key.
Speed Dialling
SPEED DIAL
1. Press and enter the desired Speed
Dial number (press
than 3 digits).
START/
2. Press .
ENTER
Direct Keypad Dialling
1. Dial the fax number.
START/
2. Press .
ENTER
200
CONTRAST
if needed.
SPEAKER
.
START/
if you entered less
ENTER
STORING AUTO DIAL FAX
NUMBERS
MENU
and then
1. Press
until ENTRY MODE is selected in the
display.
START/
. Make sure that
2. Press
ENTER
DESTINATION SETTING is selected.
START/
. Make sure that SET is
3. Press
ENTER
selected. (To clear a number, select
CLEAR .)
START/
.
4. Press
ENTER
5. To store a Rapid Key number, press the
desired Rapid Key.
To store a Speed Dial number, press
and enter a number from 1 to 100 (press
START/
if you entered l
ENTER
(If clearing a number, select it as explained
above and then press
6. If the network scanner option is installed,
SELECT DESTINATION TYPE will appear.
Make sure that FAX is selected and press
START/
.
ENTER
7. Enter the full fax number and press
8. Enter a name by pressing the letter keys and
START/
press .
ENTER
if this is a Chain Dial number
9. Select YES
or NO if not, and press
STOP
repeatedly to exit.
10.Press
or
SPEED DIAL
).
ess than 3 digits
STOP
START/
and .)
ENTER
START/
ENTER
START/
.
ENTER
.