Speaker Settings - Sharp HT-CN300H Operation Manual

Speaker settings

Speaker settings are displayed on the TV screen only when the unit is set to DVD or
VIDEO (see page 23).
Note:
The settings appear only when the TV is connected with a video cable. They will not
appear when the TV is connected with an S-video cable.
Speaker size setting
You can change the sizes of the front speakers, centre speaker, and surround speak-
ers, or turn on or off the centre speaker, surround speakers, or subwoofer.
1
Press the SET UP button.
2
Within 10 seconds, press the or
press the ENTER button.
3
Within 10 seconds, press the or
speaker.
The indicators of selected speakers flash.
TV screen
4
Within 10 seconds, press the or
To set sizes of other speakers, repeat the operation from step 3.
You can complete the setting operation by pressing the SET UP button twice.
Front speaker (Left, Right)
Centre speaker
Surround speaker (Left, Right)
Subwoofer
(*) indicates the default setting (recommended for the supplied speakers).
Caution:
button to select "SP SIZE", and
button to select the desired
button to select their sizes.
Speaker type
F-LARGE
F-SMALL *
C-LARGE
C-SMALL *
C-NO
S-LARGE
S-SMALL *
S-NO
SW-YES *
SW-NO
To set the speaker size, set the sound mode to "STANDARD". In the stereo or vir-
tual mode, only the subwoofer can be set.
F-SMALL and SW-NO cannot be combined. If the subwoofer is changed to SW-
NO whilst the front speakers are set to F-SMALL, they are changed to F-LARGE.
When the front speakers are changed to F-SMALL whilst the subwoofer is set to
SW-NO, it is changed to SW-YES.
02/6/17 HT-CN300H_(E)4.fm
HT-CN300H
Speaker size
Large diameter
Small diameter
Large diameter
Small diameter
OFF
Large diameter
Small diameter
OFF
ON
OFF
35