Audio Connection To Other Equipment; Connecting The Ac Power Lead - Sharp HT-CN400DVH Operation Manual

! Audio connection to TV or VCR
You can enjoy surround sound from TV or VCR by connecting them to the unit as
shown.
Audio signal
Audio cable
(commercially available)
Audio signal

! Audio connection to other equipment

Audio signal
Audio cable
(commercially available)
Notes:
" Change the TV input in accordance with the connected socket.
" Do not connect other equipment (VCR, etc.) between the TV and this unit. Pic-
TV
tures may be distorted.
" Refer to the operation manual of the equipment to be connected.
" Insert the plugs fully to avoid fuzzy pictures or noise.
To audio
To listen to TV or VCR sound via the speakers of this unit:
output sockets
Press the AUX button repeatedly to select the desired audio input.
OPEN/
CLOSE
To audio
TITLE
output sockets
VCR
MENU/PBC
PROG

! Connecting the AC power lead

After checking all the connections have been made correctly, plug the AC power lead
of this unit into the wall socket.
To audio MD recorder
input socket
Note:
Unplug the AC power lead from the wall socket if the unit will not be used for a pro-
longed period of time.
03/7/2
" For the TV, select "AUX
ON/
STAND-BY 1 IN".
SET UP MUTE
SUBTITLE LANGUAGE DISPLAY
" For the VCR, select
ST/MO
"AUX 2 IN".
ENTER
SLEEP
" Alternatively, press the FUNCTION button on
the main unit.
HTCN400_500DVH_E.fm
HT-CN400DVH
HT-CN500DVH
ENGLISH
Unit display
SET CHP PROG SLEEP REPEAT 1 A - B
KHz
MHz
SET CHP PROG SLEEP REPEAT 1 A - B
KHz
MHz
Wall socket
(AC 230 V, 50 Hz)
E-14
92LCN400E0270
D
F
S
V
I
N
P
E