Printer Specifications - Sharp AR-M250 series Online Manual

8 SPECIFICATIONS

Printer specifications

Printing speed
1
Resolution*
Memory
IMC Memory
Emulation
Installed fonts
Interface
1
* The factory default setting for memory used for the printer function is 16 MB. The proportion of IMC memory allocated to the
printer function can be changed in the key operator programs. See "MEMORY FOR PRINTER" in the "Key operator's guide".
* 2 Available only if the PS3 expansion kit is installed.
As a part of our policy of continuous improvement, SHARP reserves the right to make design and specification changes for product
Note
improvement without prior notice. The performance specification figures indicated are nominal values of production units. There
may be some deviations from these values in individual units.
CONTENTS
AR-M256/M257/M258: 25 pages/min. at 600 dpi
AR-M316/M317/M318: 31 pages/min. at 600 dpi
600 dpi/300 dpi selectable
Standard memory: 64 MB
Additional memory slot: 1 slot (a 128 MB or 256 MB of additional memory module (144-pin SDRAM
SODIMM) can be installed)
1
Standard memory: 32 MB*
Additional memory slots: 2 slots (maximum of 1024 MB of additional memory modules (168-pin
SDRAM DIMM) can be installed)
PCL5e, PCL6, PS3 (PostScript 3)*
PCL6 compatible: 80 outline fonts and 1 bitmap font
2
PostScript 3 compatible* : 136 outline fonts
IEEE 1284-compliant parallel interface
USB 2.0 (Full-Speed/Low-Speed) interface
10/100BASE-TX network interface
2
88