Fitting The Printed Image To The Paper - Sharp AR-M250 series Online Manual

1 PRINTING FROM WINDOWS

Fitting the printed image to the paper

The printer driver can adjust the size of the printed image to match the size of the paper loaded in the machine.
Follow the steps shown below to use this function. The explanation below assumes that you intend to print a Ledger size document
on letter size paper.
☞
See Basic printing for details on how to open the printer driver.
The "Fit To Paper Size" setting is not available when "N-Up Printing" is selected.
Note
☞
Printing multiple pages on one page
1
Click the "Paper" tab in the printer driver setup
screen.
2
Select the original size (Ledger) of the print
image in "Paper Size".
3
Check the "Fit To Page" box.
When using the PS printer driver, select "Fit To Paper
Size" in "Zoom Setting".
CONTENTS
4
Select the actual size of paper to be used for
printing (Letter).
The size of the printed image will be automatically
adjusted to match the paper loaded in the machine.
Paper Size: Ledger
Fit To Paper Size: Letter
Ledger size document
(Paper Size)
When using the PS printer driver, the print image can be
Note
enlarged or reduced by means of numerical values. (The
vertical and horizontal ratios can be set separately.)
Select "XY-Zoom" in step 3, click the "Width/Length"
button, and adjust the ratios in the screen that appears.
Letter size paper
(Fit To Paper Size)
16