Sharp AR-M250 series Online Manual page 57

5 OPERATION AT THE MACHINE
Configuring the printer condition settings
4
Touch the desired setting on the setting screen
of the desired item and touch the [OK] key.
DEFAULT SETTINGS
TONER SAVE
COPIES
ORIENTATION
To set another item, repeat steps 3 and 4.
More information on the condition setting screen
1
2
When a checkbox ( ) appears in front of a setting, a checkmark (
1
This indicates that the setting is enabled. If a checkbox with a checkmark (
setting is disabled.
When a key that appears in the form
2
If the settings continue on the following screen(s), touch the
3
return to the category selection screen, touch the [OK] key.
The currently set numerical value is displayed.
4
Numerical values can be set by touching the
5
CONTENTS
OK
1/4
1
P
DEFAULT SETTINGS
TONER SAVE
COPIES
ORIENTATION
is touched, the setting screen of that key will appear.
X X X
and
5
When finished, touch the [EXIT] key.
CONDITION SETTINGS
The following keys appear in screens that
require the entry of numerical values.
OK
1/4
1
3
P
) will appear when the checkbox is touched.
) is touched, the checkmark is cleared (
and keys to move back and forth through the screens. To
keys.
EXIT
DEFAULT SETTINGS
PCL SETTINGS
PostScript SETTINGS
1
(1 999)
4 5
(part 2)
) and the
57