Punching Is Not Possible (When A Saddle Stitch Finisher Is Installed) - Sharp AR-M250 series Online Manual

6 TROUBLESHOOTING
Improper printing operation
■ Does the print job include page sizes that cannot be
stapled?
Stapling is not possible if the print job includes page sizes
that cannot be stapled.
■ Is the paper tray that is selected in the printer driver
set to a paper size or paper type that cannot be used
for stapling?
On the machine, set the paper tray to be used for staple
printing to a paper size and paper type that can be used for
stapling.
CONTENTS
Punching is not possible (when a saddle
stitch finisher is installed)
■ Is the finisher disabled in the key operator
programs?
Enable the finisher in the key operator programs. (See
"USING THE KEY OPERATOR PROGRAMS" in the
operation manual for the saddle stitch finisher, and
"DISABLING OF STAPLER" in the key operator's guide.)
■ Are pages of different width mixed together in the
print job?
Punching is not possible when pages of different width are
mixed together in a print job.
■ Does the print job include page sizes that cannot be
punched?
Punching is not possible if the print job includes page sizes
that cannot be punched.
■ Is the paper tray that is selected in the printer driver
set to a paper size or paper type that cannot be used
for punching?
On the machine, set the paper tray to be used for punch
printing to a paper size and paper type that can be used for
punching.
(part 2)
71