Pamphlet Style; Contents - Sharp AR-M250 series Online Manual

1 PRINTING FROM WINDOWS
Two-sided printing

Pamphlet style

Pamphlet style prints two pages each on the front and back of each sheet of paper (four pages total on
one sheet) so that the sheets can be folded down the center and bound to create a pamphlet. This
function is convenient when you wish to compile printed pages into a pamphlet.
To use this function, open the printer driver and select "Tiled Pamphlet" or "2-Up Pamphlet" in
"Document Style" in the "Main" tab.
The binding edge (left side or right side) can be selected in the "Binding Edge" in the "Main" tab. The
following examples show how 8 pages are printed when pamphlet style is selected.
Print data
●
Because four pages are printed on each sheet of paper, blank pages are automatically added at the end when the total number
Note
of pages is not a multiple of four.
●
When "Tiled Pamphlet" is selected, printing will take place on paper that is twice the size of the paper size specified in the
application.
● When "2-Up Pamphlet" is selected, each page is reduced in the same way as for 2-Up and printed on the size of paper that is
specified in the application.
●
When a saddle stitch finisher is installed and "2 Staples" in "Staple" in the "Main" tab is selected, the output is stapled and folded
at the center to form a pamphlet.
● The saddle stitch tray can hold up to 20 sets when the number of sheets is 1 to 5, or 10 sets when the number of sheets is 6 to 10.
●
Paper sizes that can be used for saddle stitching are Ledger, Letter-R, A3, A4R, B4, 8K, and 16KR.

CONTENTS

Printing result
Left
(part 2)
Right
14