Installing Memory Modules - Dell PowerEdge R415 Owner's Manual

Table 3-4. Sample UDIMM Memory Configurations (Per Processor)
Memory Sockets
Memory
1 3
Module
Size
X
1 GB
X
X X
X
2 GB
X
X X
X
4 GB
X
X X

Installing Memory Modules

WARNING:
has been powered down. Allow time for the memory modules to cool before
handling them. Handle the memory modules by the card edges and avoid touching
the components on the memory module.
CAUTION:
You should only perform troubleshooting and simple repairs as authorized in
your product documentation, or as directed by the online or telephone service
and support team. Damage due to servicing that is not authorized by Dell is
not covered by your warranty. Read and follow the safety instructions that
came with the product
CAUTION:
installed in any memory socket that is not occupied. Remove memory-module
blanks only if you intend to install memory in those sockets.
1 Turn off the system, including any attached peripherals, and disconnect
the system from the electrical outlet.
2 Open the system. See "Opening the System" on page 82.
3 Remove the system board shroud. See "Removing the System Board
Shroud" on page 109.
4 Locate the memory module sockets. See Figure 6-1.
124
Installing System Components
Single Processor
2 4 Physical
Memory (GB)
1
X
2
X X
4
2
X
4
X X 8
4
X 8
X X 16
The memory modules are hot to touch for some time after the system
Many repairs may only be done by a certified service technician.
To ensure proper system cooling, memory-module blanks must be
Available Physical
Memory (GB) Memory (GB)
all
all
all
Dual Processor
Available
Memory (GB)
2 all
4
8
4 all
8
16
8 all
16
32