Installing Memory Modules - Dell EMC PowerEdge R730xd Owner's Manual

Figure 36. Removing the memory module
a. memory module
b. memory module socket
c. memory module socket ejector (2)
Next steps
1. Install the memory module.
If you are removing the memory module permanently, install a memory module blank.
NOTE:
2. Install the cooling shroud.
3. Follow the procedure listed in the After working inside your system section.
Related references
Safety instructions on page 67
Related tasks
Before working inside your system
Removing the cooling shroud
Removing the cooling fan assembly
After working inside your system

Installing memory modules

Prerequisites
The memory modules are hot to touch for some time after the system has been powered down. Allow the memory
NOTE:
modules to cool before handling them. Handle the memory modules by the card edges and avoid touching the components
or metallic contacts on the memory module.
CAUTION: Many repairs may only be done by a certified service technician. You should only perform
troubleshooting and simple repairs as authorized in your product documentation, or as directed by the online or
telephone service and support team. Damage due to servicing that is not authorized by Dell is not covered by
your warranty. Read and follow the safety instructions that are shipped with your product.
1. Follow the safety guidelines listed in the Safety instructions section.
2. Follow the procedure listed in the Before working inside your system section.
on page 68
on page 75
on page 88
on page 68
Installing and removing system components 97