Integrated Devices Screen - Dell PowerEdge R415 Owner's Manual

Option
Hard-Disk Drive
Sequence
USB Flash Drive
Emulation Type
(Auto default)
Boot Sequence Retry
(Disabled default)

Integrated Devices Screen

Option
Integrated SAS
Controller
(Enabled default)
User Accessible USB
Ports
(All Ports On default)
Internal USB Port 1
(On default)
Internal USB Port 2
(On default)
Embedded NIC1 and
NIC2 (Enabled default)
Embedded Gb NICx
(Enabled default)
MAC Address
64
Using the System Setup Program and UEFI Boot Manager
Description
Determines the order in which the BIOS will attempt to
boot from hard-drives in the system during system
startup.
Determines the emulation type for a USB flash drive.
If Boot Mode is set to UEFI, this field is disabled.
If this field is enabled and the system has failed to boot,
the system reattempts to boot after 30 seconds.
Description
Enables or disables the integrated SAS controller.
Enables or disables the user-accessible USB ports. Options
are All Ports On, Only Back Ports On, and All Ports Off.
Enables or disables the internal USB port.
Enables or disables the internal USB port.
Enables or disables the operating system interface of the
embedded NICs. The NICs may also be accessed through
the system's management controller.
Enables or disables the integrated NIC. Options are
Enabled and Enabled with PXE. PXE support allows the
system to boot from the network.
Displays the MAC address for the integrated 10/100/1000
NIC.