Programming; Basic Instructions; Programming Screen - Sharp UP-800F Instruction Manual

12

Programming

This chapter explains how to program various items.
Before you start programming, select the PRICE, PGM1, PGM2, AUTO
KEY or SD CARD mode from the mode selection screen depending on the
item you are going to program.

Basic Instructions

This section illustrates the basic programming by using an example of programming for departments.

■ Programming screen

Opening screen: When you select the PRICE, PGM1, PGM2, AUTO KEY or SD CARD mode from the mode
selection screen, your display will show a programming opening screen corresponding to the
mode you selected.
(In case of PGM2)
Code selecting screen (Dept. PLU/EAN, Customer):
Programming screen:
Programming menu: Use the cursor keys or numeric keys to
select the desired option and press the
option on the screen.
Mode you are in
Numeric key area
Common status area
Numeric key data area
Code title
Code number and its description:
(In case of PLU/EAN and customer, two lines are used for one
code, upper line - code, lower line - description.)
Use the cursor keys or numeric keys to select the desired option
E
and press the key, or touch the option on the screen. (When
you select the last item, the screen goes to the selected option
screen without pressing the
Selected menu message
Setting items:
Use the cursor to select the desired option or touch it on the screen.
To enter the data for each option, follow the instruction shown below.
Numeric entry: Use numeric keys.
Character entry: Use character keys.
Selective entry: Press the
E
the key to select it, or press the
show the options list. Use the cursor keys to
move the cursor and press the
select it, or touch the option on the screen.
PRICE MODE
PGM1 MODE
PGM2 MODE
AUTO KEY MODE
SD CARD MODE
E
key, or touch the
E
key.)
.
key to toggle options and press
s
E
key to
key to
125