Manager Mode; Entering The Manager Mode; Override Entries - Sharp UP-800F Instruction Manual

8

Manager Mode

The manager mode is used when managerial decisions must be made concerning POS terminal
entries, for example, for overriding limitations and for other various non-programming managerial
tasks.
Normal POS terminal operations may also be performed in this mode.
NOTE

Entering the Manager Mode

To enter the manager mode, use the following procedure in the REG mode:
Procedure
XX
Manager code
Example
The manager code is stored in the manager file in advance.
If the code is not found in this file, an error occurs.
If the code is correct, the POS terminal enters the manager
mode.

Override Entries

Programmed limits (such as maximum amounts) for functions can be overridden by placing the POS
terminal in the manager mode.
This example presumes that the POS terminal has been programmed not to allow coupon
Example
entries over 2.00.
REG-mode entries
To enter the
manager mode
Return to the REG
mode.
The secret code entry box will appear.
When "0" is programmed for the secret code
XXXX
µ
Secret code
Key operation
2
@
250
{
Error
• • • • • •
L
µ
1
e
{
1245
@
250
c
e
Display
Print
MGR MODE
113