Terminal Programming - Sharp UP-800F Instruction Manual

Terminal Programming

Use the following procedure to select any option included in the terminal group:
Procedure
▼
• DRAWER ALARM (Use the numeric entry)
Alarm length of time with drawer opening (0 to 255 seconds)
• Your POS terminal starts to monitor how long the drawer is kept open the moment the drawer is
opened at the end of a transaction in the REG/VOID mode. It stops the time monitoring when a valid
key (except the
monitoring after that transaction is ended. You can stop the buzzer alarm by closing the drawer. No
key entries can be made while the buzzer is sounding. If the number "0" is entered, this function will be
unavailable.
• SCREEN SAVE (Use the numeric entry)
Screen save mode timer (max. 2 digits: 0 to 99 minutes)
If the number "0" is entered, the POS terminal will turn the display off after 100 min., if it remains idle.
• BRIGHTNESS (Use the numeric entry)
Adjustment of the LCD brightness (0 to 13)
"13" is the brightest.
172
1.
2.
• MACHINE# (Use the numeric entry)
• CONSECUTIVE# (Use the numeric entry)
• BILL NUMBER (Use the numeric entry)
√ ß r
, , and keys) is pressed for the next transaction. It restarts the time
From the SETTING menu, select "8 TERMINAL."
• The TERMINAL menu will appear.
Select any option from the following options list:
Machine number (max. 6 digits: 0 to 999999)
Enter a number (max. 4 digits: 0 to 9999) that is one less than
the desired starting number.
Enter a number (max. 4 digits: 0 to 9999) that is the desired
starting number.