Programming For The Manager Work Station (Mws) - Master And Satellite; Programming Of The Mws Terminal Number - Sharp UP-800F Operation Manual Supplement

9. Programming for the Manager Work Station (MWS)
– master and satellite
The LAN interface for the UP-800F/UP-810F POS enables the UP-800F/UP-810F to perform in-line
communications to a host P.C. through the connection to a Manager Work Station (MWS).
For the setup of the Manager Work Station, please be sure to consult your authorized SHARP dealer.
The function of Manager Work Station:
1) Downloading of the terminal data
2) Uploading of the terminal data
3) Remote Job Entry (RJE) function
4) T-LOG function
5) ELECTRONIC MAIL function

(1) Programming of the MWS terminal number

The terminal number of MWS can be specified by the following procedure:
[Terminal PC]
[Terminal PC]
[Terminal PC]
[Terminal PC]
[Terminal PC]
1.
Enter the PGM2 mode from the mode selection window.
2.
Select "SETTING" and press the
The SETTING window will appear.
3.
Select "MWS CONFIG" and press the
The MWS CONFIG window will appear.
4.
Move the cursor to the "IP ADDRESS 4" line.
Enter the terminal number (0-254) in the IP ADDRESS 4 line
of MWS and press the
• Entering a terminal number of the machine itself results in
"ENTRY ERROR".
e
key.
e
key.
c
key.
51