Table of Contents
Advertisement
7
Manager Mode
The manager mode is used when managerial decisions must be made concerning register
entries, for example, for overriding limitations and for other various non-programming managerial
tasks.
Normal register operations may also be performed in this mode.
NOTE
Entering the Manager Mode
To enter the manager mode, use the following procedure in the REG mode:
Procedure
XX
Manager code
Example
The manager code is stored in the manager file in advance.
If the code is not found in this file, an error occurs.
If the code is correct, the register enters the manager mode.
Override Entries
Programmed limits (such as maximum amounts) for functions can be overridden by placing the register in
the manager mode.
This example presumes that the register has been programmed not to allow coupon
Example
entries over 2.00.
REG-mode entries
Enter to the
manager mode
Return to the REG
mode.
The secret code entry box will appear.
When "0" is programmed for the secret code
XXXX
µ
Secret code
Key operation
2
{
@
250
Error
• • • • • •
L
@
250
A
e
Display
Print
69
Advertisement
Table of Contents
