Before Recording - Sharp MD-MT821H Operation Manual

BEFORE RECORDING

Type of recording
Two types of recording are possible: "Digital recording" and "Analogue recording". There
are different cables and connections for each type of recording, depending on the sockets
on the equipment being connected to the unit.
(1) Analogue recording
Connect the unit to equipment that has a
line output socket, using the analogue cable
included with this unit.
Main equipment: CD player, MD player,
radio cassette player, etc.
Cable required: Analogue cable included
with this unit
Playback side
To the line output
sockets on a stereo
Recording side
OPTICAL/
LINE IN
AUDIO OUT
R L
RIGHT LEFT
To the
OPTICAL/LINE
IN socket
E-7
(2) Digital recording
Connect the unit to equipment that has an
optical output socket using the optical digi-
tal cable included with this unit. Using an
optical signal to transfer the music to a
MiniDisc allows very high quality recording.
Main equipment: CD player, MD
player,CS/BS tuner, etc.
Cable required: Optical digital cable (Op-
tical digital cable included with the unit
or optional optical digital cable AD-
M2DC)
Recording side
DIGITAL OUT
Playback side
To the optical out-
put socket (square
shaped socket) on
a stereo etc.
To the OPTICAL/
LINE IN socket
OPTICAL/
LINE IN
OPTICAL OUT
Playback side
To the optical out-
put socket (round
shaped socket) on
an MD player etc.