Before Recording - Sharp MD-MS722H Operation Manual

BEFORE RECORDING

Type of recording
Two types of recording are possible: "Digital recording" and "Analogue recording". There
are different cables and connections for each type of recording, depending on the sockets
on the equipment being connected to the unit.
(1) Analogue recording
Connect the unit to equipment that has a
line output socket, using the analogue
cable included with this unit.
Main equipment: CD player, MD player,
radio cassette player, etc.
Cable required: Analogue cable in-
cluded with this unit
AUDIO OUT
Playback side
R L
RIGHT LEFT To the line output
sockets on a stereo
Recording side
OPTICAL/
To the
LINE IN
OPTICAL/LINE
IN socket
(2) Digital recording
Connect the unit to equipment that has an
optical output socket using the optical dig-
ital cable included with this unit. Using an
optical signal to transfer the music to a
MiniDisc allows very high quality record-
ing.
Main equipment: CS/BS tuner, CD
player, MD player, etc.
Cable required: Optical digital cable
(Optical digital cable included with the
unit or optional optical digital cable AD-
M2DC)
Recording side
OPTICAL/
LINE IN
To the
OPTICAL/
Optical digital cable
LINE IN
(AD-M2DC, available
socket
separately)
Optical digital
cable
(supplied)
DIGITAL OUT
OPTICAL OUT
Playback side
Playback side
To the optical output
To the optical output socket
socket (square shaped
(round shaped socket) on
socket) on a stereo etc.
an MD player etc.
9
MD-MS722H(SUK)