Sharp MD-MT821H Operation Manual page 13

Hide thumbs Also See for MD-MT821H:
Table of Contents

Advertisement

2
2
Open.
1
Press.
3
RELEASE
Caution:
Whilst you are using the rechargeable
battery and the alkaline battery at the
same time, do not remove either of them.
If you do, when the unit is in the play
mode, playback will stop. When in the
recording mode, the recorded contents
will be erased, and the power may be
disconnected.
Do not use rechargeable batteries
(nickel-cadmium battery etc.) in the bat-
tery case.
If the unit is not used for a long period of
time, remove the battery. (Even if the
power is turned off, the battery will drain
slowly but continuously.)
Be sure to hold the plug when removing
it. If you pull on the lead, it may break,
or the unit may malfunction.
Do not use any car adaptor except for
the separately available AD-CA20X.
For information about the battery life, see
the battery item in the SPECIFICA-
TIONS on page 39.
This unit should only be used within the
range of 0 C (32 F) and 40 C (104 F).
Back of the
MD recorder
LOCK
Alkaline battery power with a
rechargeable battery
If you use the battery case and the re-
chargeable battery at the same time, the
MD can play much longer than with only
one source of battery power.
Use one commercially available alkaline
battery (LR6, "AA" size).
1
Make sure that a rechargeable battery
is inserted.
Do not use the unit if it only has an
alkaline battery in it.
2
Insert the battery into the battery case.
(1) Open the case cover.
(2) Insert the battery according to the
polarity marked on the inside of the
battery case. Then, close the case
cover.
3
Attach the battery case to the main unit.
(1) Match the bumps on the battery case
to the holes in the main unit.
(2) Turn the screw in the direction
marked "LOCK" to secure the bat-
tery case.
AC power
1
Connect the lead from the AC adaptor
to the DC IN 5V socket on the main unit.
2
Plug the AC adaptor into an AC socket.
Notes:
When there is thunder or lightning in your
vicinity, unplug the AC adaptor from the
AC socket.
When the unit is not in use for extended
periods, remove the AC adaptor from the
AC socket.
Never use an AC adaptor other than the
one specified. Otherwise, problems or
serious hazards may be created.
Do not bend, twist or tie the power lead
or put heavy objects on top of it.
E-6

Advertisement

Table of Contents
loading

Table of Contents