Table of Contents
Advertisement
6
When a sound, such as a person speak-
ing, is picked up by the microphone, re-
cording will begin automatically.
If a silence lasts for 3 seconds or
more, the recording will be paused au-
tomatically. However, the unit will not
pause for about the first 10 seconds
after recording has started.
To interrupt a synchro recording:
Press the 06 button whilst recording.
The Mic synchro recording mode will be
cancelled, and the unit will enter the re-
cording stand-by mode.
To resume synchro recording, press the
ENTER/SYNC button again.
To stop recording:
Press the /:OFF button.
Notes:
If you want to use a microphone, be sure it is a plug-in-power type microphone.
When a plug-in-power type microphone is plugged in, the main unit will provide power
for the microphone's operation.
If a different type of microphone is plugged in, it may not operate properly or it may
cause the unit to malfunction.
Insert the plug firmly. If you don't, the recording will not be made properly.
Use a microphone with a 3.5 mm (1/8") diameter stereo mini plug.
Whilst making a mic recording, do not connect anything to the LINE IN socket on the
main unit.
Recording from the microphone
(Mic manual recording)
You can start recording manually (any-
time you like).
1
Put the unit in the recording stand-by
mode. (Perform steps 1 - 4 in the "Mic
synchro recording" section.)
2
Press the 06 button.
Recording will start.
To interrupt a recording:
Press the 06 button whilst recording.
The unit will enter the recording stand-
by mode.
To resume recording, press the 06 but-
ton again.
The track number will be increased by
one each time you interrupt a record-
ing.
To stop recording:
Press the /:OFF button.
E-13
Advertisement
Table of Contents
