Sharp MD-MT821H Operation Manual page 30

Hide thumbs Also See for MD-MT821H:
Table of Contents

Advertisement

To play at double speed
(Mono recording only)
Press the ENTER/SYNC button whilst a
MiniDisc recorded in the monaural long-play
mode is being played.
The unit will display "FAST PLAY" and
start fast playback
When the ENTER/SYNC button is
pressed again, the unit will return to nor-
mal play.
Notes:
Depending on the contents recorded on
a MiniDisc, it may be difficult to hear
them.
If a track recorded in the stereo mode is
reached during fast playback, the fast
playback mode will be cancelled.
To re-enter the fast playback mode,
press the ENTER/SYNC button.
To interrupt fast playback:
Press the 06 button during playback.
When the 06 button is pressed again,
the unit will resume fast playback.
VOL
Random play or repeat play
During playback or whilst in the stop mode,
press the MODE button (Remote control :
move the shuttle switch to PLAY MODE)
repeatedly to select the playback mode.
RANDOM
RANDOM
1
No display
If the playback mode is selected whilst
stopped, press the 06 button to start
playback.
Notes:
When "TOC" is displayed, repeat play
is impossible.
In random play the unit will select and
play tracks automatically. (You cannot
select the order of the tracks.)
After all of the tracks have been played
once each in random order, the unit will
stop automatically.
During random play or repeat play of a
single track, cue and review of the pre-
vious or next tracks is not possible.
During random play, the unit cannot find
the beginning of any track which has
been played.
E-23
PLAY MODE
Random play
Repeat play of tracks in random
order
Repeat play of all of the tracks
Repeat play of a single track
Normal playback

Advertisement

Table of Contents
loading

Table of Contents