Before Recording - Sharp MS702 - MiniDisc Recorder Operation Manual

BEFORE RECORDING

Type of recording
Two types of recording are possible: "Digital recording" and "Analog recording". There
are different cables and connections for each type of recording, depending on the jacks
on the equipment being connected to the unit.
(1) Analog recording
Connect the unit to equipment that has a
line output jack, using the cable included
with this unit.
Main equipment: CD player, MD player,
radio cassette player, etc.
Cable required: Connecting cable in-
cluded with this unit
AUDIO OUT
Playback side
R L
RIGHT LEFT
To the line output
jacks on a stereo
Recording side
OPTICAL/
LINE IN
To the OPTICAL/LINE
IN jack
(2) Digital recording
Connect the unit to equipment that has an
optical output jack using an optical digital
cable (available optionally). Using an opti-
cal signal to transfer the music to a Mini-
Disc allows very high quality recording.
Main equipment: DSS tuner, CD
player, MD player, etc.
Cable required: Optical digital cable
(AD-M1DC or AD-M2DC, available op-
tionally)
Recording side
OPTICAL/
To the LINE IN
OPTICAL/
LINE IN
Digital cable
jack
(AD-M2DC, available
optionally)
Digital cable
(AD-M1DC,
available optionally)
DIGITAL OUT
OPTICAL OUT
Playback side Playback side
To the optical output jack
To the optical output jack
(square shaped jack) on a
(round shaped jack) on
stereo etc.
an MD player etc.
8
MD-MS702