Wiring Diagrams - Regency P33-NG4 Owners & Installation Manual

INSTALLATION

WIRING DIAGRAMS

This heater does not require a 120V A.C. supply for operation. In case of a power failure, the burner switch and the optional remote control/thermostat will
continue to operate. However, a 120V A.C. power supply is needed for the fan/blower operation.
(Do not cut the ground terminal off under any circumstances.)
NOTE: Even if the fan is not purchased with the unit, it is still a good idea to bring power to the receptacle box (provided with the unit) in case the
fan is installed at a later date.
NATURAL GAS NOT
For Units and Units Equipped with DC Spark Boxes
48
®
Regency P33-4 Zero Clearance Direct Vent Gas Fireplace