Faceplate & Door Frame Overlay Installation - Regency Horizon HZ54-NG Owners & Installation Manual

1) Install the door frame overlay by hooking the top fl ange over top of
the glass door, push in the bottom of the door frame overlay to secure
in place.
Door Frame
Overlay
Magnet Position
2) Place 2 of the supplied magnets on the lower corners of the Door
Frame Overlay, this will keep the Faceplate in postion after it has
been installed.
HZ54 Regency Horizon TM Gas Fireplace
FACEPLATE &
DOOR FRAME OVERLAY INSTALLATION
Glass Door
3) Secure the left side mounting bracket to the backside of the faceplate
as shown below. Use 3 screws supplied to secure the mounting
bracket in place. Repeat for right side.
Left Side
Mounting Bracket
NOTE: Ensure that the faceplate is positioned correctly when installing
the mounting brackets to the faceplate. There is a top and bottom,
the top of the faceplate has 4 tabs whereas the bottom only has 2
as shown in the diagram below.
INSTALLATION
Mounting Bracket
shown in place
39