Table of Contents
Advertisement
This heater does not require a 120V A.C. supply for operation. However,
a 120V A.C. power supply is needed for the fan/blower operation.
Caution: Ensure that the wires do not touch any hot
surfaces and are away from sharp edges.
CAUTION: Label all wires prior to disconnection
when servicing controls. Wiring errors can cause
improper and dangerous operation.
®
Regency
L234 Direct Vent Gas Insert
WIRING DIAGRAMS
WARNING: Electrical Grounding Instructions
This appliance is equipped with a three pronged
(grounding) plug for your protection against shock
hazard and should be plugged directly into a properly
grounded three-prong receptacle. Do not cut or remove
the grounding prong from this plug.
INSTALLATION
29
Advertisement
Table of Contents
