LP Conversion instructions for BEFORE UNIT INSTALLATION.
THIS CONVERSION MUST BE DONE BY A QUALIFIED GAS FITTER, IF IN DOUBT DO NOT DO THIS CONVERSION!!
LP Conversion Kit Contains:
Qty. Part #
Description
1
910-037
LP Pilot Orifi ce
1
904-163
Orifi ce #54
1
904-529
5/32" Allen Key
1
918-590
LP Conversion Decal
1
908-528
Red Propane Label
1
918-688
Instruction Sheet
1) Open the left and right side faceplate
panels.
2) Turn off the gas supply.
3) Remove the bottom louver by pulling out.
4) Remove the glass door.
a) Pull off the left side spring hook that
holds the door in place. While holding the
hook turn it upside down and place it into
the middle opening on the top side mounting
bracket. Repeat for right side
Spring Hook
®
Regency
L234 Direct Vent Gas Insert
CONVERSION KIT #536-969 FROM NG TO LP
Top Mounting Bracket
b) Swing the door out 45 degrees and lift up
and out.
.
5) Remove the logs if installed.
6) Remove the brick panels if installed.
7) Remove the burner by undoing the 3
screws.
INSTALLATION
Burner Removed
8) Remove the burner tray by undoing the 4
screws.
Burner Tray Removed
15