Projecting Component Video Images; Projecting Rgb Video Images - Epson EMP-53 User Manual

Connecting to a Video Source
Projecting Component Video
Use the optional component video cable to connect the video source to the
Computer/Component Video port at the rear of the projector. See
"Appendices: Optional Accessories"
To component video
output port
Component video cable
(optional)
TIP
• After projection starts, change the "Input Signal" setting in the
"Video" menu to either "Component Video
"Component Video (YPbPr
equipment. p.48
• If more than one external component is connected to the projector,
use the [Source] button on the projector's control panel or the
[Computer] button on the remote control to set the input source to
"Component Video (YCbCr)" or "Component Video (YPbPr)",
depending on the type of signal being input.
Images
p.84
To Computer/
Component
Video port (blue)
(YCbCr )" or
)" to match the signals from the video
p.28

Projecting RGB Video Images

RGB video is used when RGB signals that have copy protection added are
input and projected. Use the accessory computer cable to connect the video
source to the Computer/Component Video port on the rear of the projector.
To RGB output port
Computer cable
(accessory)
TIP
• After projection starts, change the "Input Signal" setting in the
"Video" menu to "Computer".
• For a RGB connection, a commercially available adapter or
converter cable might be required.
To Computer/
Component Video
port (blue)
p.46
23