Adjusting The Tracking - Epson EMP-53 User Manual

Adjusting the Image Quality

Adjusting the Tracking

If vertical stripes appear in the projected images,
and this cannot be fixed using automatic setup,
you will need to adjust the tracking
using the following procedure.
PROCEDURE
Press the [Menu] button on the remote control, and then
1
select "Tracking" from the "Video" menu.
For details on this operation, refer to "Using the Configuration
Menus". p.57
Video Position
Audio Tracking
Setting Sync .
User's Logo Brightness
Advanced Contrast
About Sharpness
Reset All Color Mode
Input Signal
Auto Setup
Reset
[ESC]: Return [ ]: Select [ ]: Adjust
manually
Adjust
0000
:
: 0
: 0 - +
: +
0 -
: 0 +
-
Select [Normal [Normal ] ]
: :
Select
:
[Computer ]
:
ON OFF
Execute
[Menu]: Exit
Press the [ ] and [ ] buttons to set the tracking value
2
to a value that causes the vertical stripes to
disappear from the image.
The tracking value increases or decreases each time a button is
pressed.
Video Position
Audio Tracking
Setting Sync .
User's Logo Brightness
Contrast
Advanced
Sharpness
About
Reset All Color Mode
Input Signal
Auto Setup
Reset
[ESC]: Return [ ]: Select [ ]: Adjust
After making the adjustment, press the [Menu] button
3
to exit the configuration menu.
TIP
The image will flash when continuous tracking adjustment is carried
out, but this is normal.
Adjust
: 1000
: 0
: 0 +
-
:
0 - +
: 0
- +
Select [Normal [Normal ] ]
: Select
[Computer ]
: ON OFF
Execute
[Menu]: Exit
36