Connecting to a Video Source
Projecting S-Video Images
Use a commercially-available
To S-Video output port
S-Video cable
(commercially-available)
TIP
If more than one external component is connected to the projector,
press the [S-Video] button on the remote control after projection
starts, or repeatedly press the [Video/BNC] button on the projector's
control panel until "S-Video" is displayed on the projected image to
select the signal to be projected.
S-Video
cable to make the connections.
To [S-Video] port
p.35
Projecting Component Video Images
Use a commercially-available
conversion adapters to make the connections.
To component video
output ports
Component video cable
(commercially-available)
component video
cable and three
blue
green
red
To [BNC] ports
Adapters
(commercially-
available)
27