Epson EMP-53 User Manual page 69

When the Indicators Provide No Help When the Indicators Provide No Help
Are the cables connected correctly?
Has the correct resolution been
selected?
Have the
"Position" been adjusted correctly?
• • • •
Image is distorted
• • • •
Image contains
interference
Is an extension cable being used?
Are the image signal format settings
correct?
"Sync. ", "Tracking " and
p.16–p.23
Set the computer so that the signals that are output are compatible with this
projector. Refer to the documentation provided with your computer for details on
changing the settings. p.91
If the "Auto Setup" command in the "Video" menu is set to "OFF", press the
[Auto] button on the remote control to adjust these settings. If the images have not
been correctly adjusted after using the automatic setup function and after pressing
the [Auto] button, adjust the settings manually using the respective menus.
p.35, p.45
If an extension cable is used, electrical interference may affect the signals. Use the
accessory cables and check if this helps.
If a computer, component video
projector, use the "Input Signal" command in the "Video" menu to select the signal
format which matches the signal connected source.
If a composite video or S-Video
"Video Signal" command in the "Video" menu to select the video signal format.
p.48
or RGB video source is connected to the
p.46, p.48
source is connected to the projector, use the
68