Advanced" Menu - Epson EMP-53 User Manual

Using the Configuration Menu Functions Using the Configuration Menu Functions

"Advanced" Menu

Video
Brightness Control
Audio
Startup Screen
Setting
Color Adjustment
User's Logo
Advanced
Rear Proj .
About Ceiling
Reset All COM Port
Language
Reset
[ ]: Select [ ]: Enter
:
High Low
:
ON OFF
:
Color Temp. RGB Adjust
:
ON OFF
:
ON OFF
:
RS-232C USB
Select [English]
Execute
[Menu]: Exit
Sub-menu
Brightness This lets you set the lamp brightness to one of two settings.
Control When set to "Low", the lamp brightness is darker than for the
"High" setting.
When projection starts, images will initially be projected at
the "High" brightness setting, even when set to "Low".
Approximately two minutes after projection starts, the
message "Brightness Control: Switched into "Low" mode."
will be displayed and the brightness will return to the "Low"
setting.
Startup Sets whether the startup screen is displayed or not.
Screen •To change the user's logo, you need to record your own
user's logo.
Color Adjusts the colour temperature
Adjustment (red, green, blue) color for each input source.
•Color Temp.: Lets you adjust bright colours within a range
from reddish tinges to bluish tinges. If the
colour temperature is lower, colours appear
reddish and color tones appear softer.
If the colour temperature is higher, colours
appear bluish and colour tones appear sharper.
Press the [Enter] button and make the
adjustment in the colour adjustment sub-menu
that appears.
•RGB : Press the [Enter] button, select "R" (red), "G"
(green) or "B" (blue) and make the adjustment
in the colour adjustment sub-menu that
appears.
(This item cannot be selected if "sRGB" has been selected as
the "Color Mode" setting in the "Video" menu.)
Rear Proj. Use when projecting images from behind a translucent
screen.
When set to "ON", the projected images are horizontally
reversed.
Ceiling Use when installing the projector to a ceiling. When set to
"ON", the projected images are horizontally and vertically
reversed.
Function
and intensity of each RGB
53
Default
High
ON
Color Temp.:
Depends on
connection
OFF
OFF