Epson EMP-53 User Manual page 87

Epson multimedia projector owner's manual emp-53, emp-73
Hide thumbs Also See for EMP-53:
Table of Contents

Advertisement

Glossary
Glossary
Progressive scanning
Refresh rate
Resize display
SDTV
Security lock
Squeeze mode
sRGB
SVGA
S-Video
SXGA
Sync. (Synchronization)
Tracking
USB
UXGA
VGA
A method of image scanning whereby the image data from a single image is scanned sequentially from top to bottom to create
a single image.
The light-emitting element of a display maintains the same luminosity and colour for an extremely short time. Because of this,
the image must be scanned many times per second in order to refresh the light-emitting element. The number of refresh
operations per second is called the "refresh rate", and is expressed in hertz (Hz).
This function is used to project computer images that have a resolution more than or less than the projector's panel resolution
to be projected so that they fill the whole of the projection area.
An abbreviation for Standard Definition Television. It refers to standard television systems which do not satisfy the conditions
for High-Definition Television.
A device consisting of a projector case with a hole in it that a commercially-available theft-prevention cable can be passed
through in order to secure the device to a table or pillar. This projector is compatible with the Microsaver Security System
manufactured by Kensington.
In this mode, wide-screen images in 16:9 mode are compressed in the horizontal direction so that they are stored on the
recording medium as 4:3 images.
When these images are played back by the projector in squeeze mode, they are restored to their original 16:9 format.
An international standard for colour intervals that was formulated so that colours which are reproduced by video equipment
can be handled easily by computer operating systems (OS) and the Internet.
A type of video signal with a resolution of 800 (horizontal) × 600 (vertical) dots which is used by IBM PC/AT-compatible
computers.
A video signal which has the luminance component and colour component separated in order to provide better image quality.
It refers to images which consist of two independent signals: Y (luminance signal), and C (colour signal).
A type of video signal with a resolution of 1280 (horizontal) × 1024 (vertical) dots which is used by IBM PC/AT-compatible
computers.
The signals output from computers have a specific frequency. If the projector frequency does not match this frequency, the
resulting images will not be of a good quality. The process of matching the phases of these signals (the relative position of the
crests and troughs in the signal) is called "synchronisation". If the signals are not synchronized, problems such as flickering,
blurriness and horizontal interference can occur.
The signals output from computers have a specific frequency. If the projector frequency does not match this frequency, the
resulting images will not be of a good quality. The process of matching the frequency of these signals (the number of crests in
the signal) is called "tracking". If tracking is not carried out correctly, wide vertical stripes will appear in the projected images.
An abbreviation for Universal Serial Bus. USB is an interface for connecting personal computers to peripheral devices which
only support relatively low data transmission speeds.
A type of video signal with a resolution of 1600 (horizontal) × 1200 (vertical) dots which is used by IBM PC/AT-compatible
computers.
A type of video signal with a resolution of 640 (horizontal) × 480 (vertical) dots which is used by IBM PC/AT-compatible
computers.
86

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Emp-73

Table of Contents