Connecting Your Tv And Vcr To The Media Center; If Your Tv Has Audio Output Jacks - Bose 3-2-1 SERIES II Owner's Manual

SYSTEM SETUP
Connecting your TV and VCR to the media center
Note: There are two options for connecting your TV and VCR to the media center. Before you
proceed, you must determine if your TV has audio output jacks. Consult your TV owner's guide if
you need assistance.
Figure 12
TV and VCR connections
with media center
If your 711 has audio output jacks
If your TV has audio output jacks, you can directly route the TV audio to the 3.2.1 home
entertainment system (Figure 12).
1, Connect one end of the supplied stereo cable to the TV Audio IN jacks on the rear panel
of the media center. Insert the white RCA plug into the TV white L jack. Insert the red
RCA plug into the TV red R jack.
2. Connect the other end of the stereo cable to the audio output jacks on your TV. Insert the
white RCA plug into the white AUDIO OUT L jack. Insert the red RCA plug into the red
AUDIO OUT R jack.
.
Insert one end of the supplied video cable (yellow) to the Video OUT C (composite) jack
on the back of the media center. Insert the other end of the video cable into one of the
video input jacks on your TV.
Write the name of the video input jack used on your TV in the box on page 25, After
you turn on the system, you will need to select this video input on your TV in order
to view the 3o2ol system video output.
_B_DDD[I_DDD_
Video cable
(yellow connectors)
Stereo cable
(red and white connectors)
m
TV connector
[
II
Cable/satellite box
(if applicable)
k d
Existing I
cable
VCR
Existing I
cable
TV
!
O == == == _=_
*Could be labelled "FIXED", "MONITOR", or "HiFi".
16