System Setup; Connecting Your Tv And Vcr To The Media Center; If Your Tv Has Audio Output Jacks - Bose 3-2-1 Owner's Manual

Connecting your TV and VCR to the media center

Figure 17
Connecting your TV and
VCR to the media center
using the TV's audio output
There are two options for connecting your TV and VCR to the media center. Before you pro-
ceed, you must determine if your TV has audio output jacks. Consult your TV owner's guide if
you need assistance.

If your TV has audio output jacks

If your TV has audio output jacks, you can directly route the TV audio to the 3•2•1 home
entertainment system.
1. Attach one end of the supplied video cable (yellow) to the VIDEO OUTPUT jack on the
back of the media center (Figure 17).
2. Attach the other end of the video cable (yellow) into one of the video input jacks on your
TV.
Make note of the video input jack you use
Most TVs have several video input jacks (for example: Video 1, Input 1, or Aux).
When you connect the yellow video cable to one of these jacks, make note of the name of
the jack you choose. You will need to select the corresponding video input setting on your
TV in order to play a DVD. See "Selecting the correct video input on your TV" on page 20.
3. Locate the AUDIO INPUT jacks on the back of the media center. Under the AUDIO INPUT
heading, there are jacks labeled VIDEO 1, VIDEO 2, and AUX.
4. Attach the supplied stereo cable to the media center by inserting the white plug into the
jack labeled VIDEO 1 (L) and the red plug into the jack labeled VIDEO 1 (R).
5. Attach the other end of the stereo cable to the TV by inserting the white plug into the
Audio Out (L) jack and the red plug into the Audio Out (R) jack.
AUDIO INPUT
VIDEO 1 VIDEO 2
D L L D
75 AM
FM LOOP
ANTENNA ANTENNA
OPTICAL
R R D
VIDEO VIDEO AUDIO SPEAKERS
AUX INPUT OUTPUT OUTPUT
L C C L
ACOUSTIMASS MODULE
R
S S R
AM271966_00_V.pdf August 18, 2003

System Setup

19