Connecting Your Tv To The Media Center; Making Audio Connections; Making Composite Video Connections - Bose 3-2-1 SERIES II Owner's Manual

SYSTEM SETUP
Connecting your TV to the media center
=b Note: If you will be using the 3.2.1 system with both a TV and a VCR, skip this section and go
to "Connecting your TV and VCR to the media center" on page 16.
Making audio connections
,_ Note: If your TV does not have audio output jacks, see "If your TV does not have audio output
jacks" on page 17. Otherwise, continue.
1. Connect one end of the supplied stereo cable to the TV Audio IN jacks on the rear panel
of the media center (Figure 11). Insert the white RCA plug into the TV white L jack. Insert
the red RCA plug into the TV red R jack.
2. Connect the other end of the stereo cable to the audio output jacks on your TV. Insert the
white RCA plug into the white AUDIO OUT L jack. Insert the red RCA plug into the red
AUDIO OUT R jack.
Figure 11
TV (composite video)-to-
media center connections
Making composite video connections
Note: Some older TVs with standard TV cable connectors do not have a composite video or an
S-video input. Such TVs are not compatible with any DVD players and require use of an RF mod-
ulator for this connection. RF modulators are available at your local electronics store.
1. Insert one end of the supplied video cable (yellow) to the Video OUT C (composite) jack
on the back of the media center (Figure 11).
2, Insert the other end of the video cable into one of the video input jacks on your TV.
Write the name of the video input jack used on your TV in the box on page 25, After
you turn on the system, you will need to select this video input on your TV in order
to view the 3o2ol system video output.
Stereo cable
(red and white connectors)
TV connector )anel
L
R
o
*Could be labelled "FIXED", "MONITOR", or "HiFi".
15