Cover Sheet Setup - Xerox WorkCentre Pro 575 Advanced Features Manual

Transmitting Documents
5-12

Cover Sheet Setup

To set up a cover sheet for the first time, prepare an image to be
pasted to the cover sheet, then perform the following steps.
To enable the Cover Sheet feature:
1. If you would like to add an image to your cover sheet, load the
image document face down in the Document Support.
2. Press:
Menu
3. Press to enable the Cover Sheet option.
4. Select the Cover Sheet image option:
To create a cover sheet without an image, press
To add an image to your cover sheet, press
5. Press Start to scan the image and paste it on your cover sheet.
The scanned image can appears on your cover sheet when you send
a document using the "Sending Documents with a Cover Sheet"
procedure.
Cover sheet
2.Off
1.On
Load cover image
1.Yes
2.No
.
.
Press START to store
WorkCentre Pro 555/575