Programming the Machine
2-18
22. To add an additional option, go to step 8. To exit, press
go to step 23 to complete the procedure.
23. To link this Speed Dial Number to a One Touch key, press the
desired One Touch Key; or to skip this step, press Enter .
Note: If you select an assigned One Touch number, you have the
option of deleting or retaining the information previously
stored.
24. To assign additional Speed Dial numbers, repeat steps 2-23.
25. When you have completed the Speed Dial assignment, press
Exit or Stop to return to the Standby Mode.
Press One Touch
or ENTER
WorkCentre Pro 555/575
and