Xerox WorkCentre Pro 575 Advanced Features Manual page 50

Programming the Machine
2-32
Note: To reset the Department Code, the following is displayed.
To recover the Department Code already being set, press
1 . To set a new Department Code, press 2 .
2. To setup the Master Department Code, press
Note: If the Master Number is assigned, go to step 6 to set
additional Department Codes.
Note: Department code 01 is reserved for the Master Code.
3. Using the Numeric Keypad, enter the name to assign to the
Master Department, then press Enter.
4. Using the Numeric Keypad, enter the 5-digit master code to
assign to the Master Department, then press Enter.
Note: The 5-digit Master Code is required to access the
Department Code feature to perform any modifications.
Please remember your Master Code.
Set dept. code
1.Recover setting
2.New
.
Name (40 max)
[
Master code
[ ]
WorkCentre Pro 555/575
]