WorkCentre Pro 555/575
5. The Master Department Code entry is completed. To setup
individual Department Codes, go to step 6. To exit this feature,
press Stop .
6. Enter a number between 2 and 50 to assign to this Department,
then press Enter.
7. Using the Numeric Keypad, enter the name to assign to this
Department (max 20 characters), then press Enter . Refer to the
"Character Entries" Section.
8. Using the Numeric Keypad, enter the 5-digit Department Code to
assign to this Department, then press Enter .
Note: The 5-digit Department Code is required to access and
operate the WorkCentre.
9. The Department Code entry is completed. To set additional
Department codes, repeat steps 6 through 8. To exit this feature,
press Exit or Stop .
Programming the Machine
Dept. number (1-50)
Name
(40 max)
[
]
Dept. code
[
]
[
]
2-33