Scrub Controls-Deluxe - Windsor chariot iSCRUB CS24 10060210 Operating Instructions Manual

SCRUB CONTROLS-DELUXE

1. One Touch Switch
2. Solution Control Switch
3. Brush Pressure Switch
1. ONE TOUCH SWITCH
This switch controls the scrub brushes and vacuum all in one touch.
To start scrubbing, press the one touch switch. The brush drive motors will turn on, the scrub deck will
lower to the "light scrub" position, the solution will flow at "one bar" rate, the squeegee will lower and the
vacuum will turn on. The information display window will show which functions are operating. If the throttle
pedal is in the neutral position for more than two seconds the brushes and solution flow will stop. If the one
touch switch is activated without brushes installed, the brush motors will stop, the scrub deck will rise, and
the brush pressure indicator will display error code 9000.
To stop scrubbing, press the one touch switch. The brush drive motors will turn off, the scrub deck will
raise the solution flow will stop, the squeegee will raise after a 15 second delay, and the vacuum motor will
turn off. This delay is to clear the vacuum hose of recovered solution.
3-11
5
4
4. Vacuum/Squeegee Switch
5. Display Toggle Switch
86037660 CHARIOT 11/09/06
1
3 2