Appendix A Troubleshooting
Basic Troubleshooting
This section describes how to troubleshoot. If problems are not resolved by using the
following countermeasures, contact your Kyocera Mita service representative.
First check the following ordinary causes of abnormalities:
1.
Check the power of the copier and computers and cable connections.
2.
Check the LCD Touch Screen of the copier to find information concerning the
current trouble.
3.
If possible, print the "Test Print" from the LCD of the copier to check that the
settings are appropriate.
4.
Check the current status of the Print Controller.
Check the current status shown on the LCD of the Control Panel.
Touch the [STATUS] key on the Basic Screen to check the job status.
When your job is being processed or waiting for being printed;
Windows:
The current status is displayed on the dialog shown by double-clicking [Start]-
[Settings]-[Printers]-[Kyocera Mita Vi7360 PS].
Macintosh:
The current status is displayed on the window shown by double-clicking
[Kyocera Mita Vi7360 PS] on the desktop.
Appendix A-2 PS-1 (Printing System (1) PostScript option)