Introduction - Kyocera Vi7360 Instruction Handbook Manual

Introduction

Introduction
The Kyocera Mita PS-1 is a PostScript option for the Printing System (1) Print Control-
ler.
The Printing System (1) + PS-1 Print Controller works as an interface between the
Vi7360 Printer/Copier and a workstation, and enables direct PostScript printing from the
workstation environment.
The print engine on the printer side and the optional network interface card include
separate operating manuals, namely, the Vi7360 Instruction Handbook and the NC-5
Instruction Handbook (on CD), respectively.
For detailed operations of Windows 95/98/NT 4.0/2000 or Mac OS, refer to the operat-
ing manuals for each operating system.
For applications operations, refer to the operating manuals provided with each applica-
tion.
FCC Regulations
Warning: The Kyocera Mita Printing System (1) + PS-1 generates, uses and can
radiate radio frequency energy. If it is not installed and used in accordance with the
instructions manual, interference with radio communications may result. This equip-
ment has been tested and found to comply with the limits for a Class A computing
device, pursuant to Subpart B, Part 15, of FCC rules, which are designed to provide
reasonable protection against interference from such equipment when it is operating
in a commercial environment.
Users operating this equipment in a residential area are likely to cause interference,
in which case they may be required to correct the interference at their own expense.
Canadian Department of Communications Regulations
Le présent appareil n'émet pas de bruits radioélectriques dépassant les limites
applicables aux de Class A prescrites dans le règlement sur la brouillage
radioélectrique édicté par Le Ministère des Communications du Canada.
This equipment does not exceed the Class A limits for radio noise emissions as set
out in the radio interference regulations of the Canadian Department of Communi-
cations.
iv PS-1 (Printing System (1) PostScript option)