Table of Contents
Advertisement
3.
Confirm the current settings.
4.
Change setting values of [Print Quantity], [Duplex Mode] or [Image Shift], if
necessary.
How to change [Print Quantity]
Enter the value from the keypad on the Control Panel of the Vi7360 when the
[Printer Check Mode Screen] appears.
How to change [Duplex Mode]
To show the [Basic Screen], touch the [Duplex Mode]. Set the [Duplex Mode] on
the [Basic Screen]. To return to the [Printer Check Mode Screen], press the
[CHECK] button on the Control Panel of the Vi7360.
How to change [Image Shift]
Available only when On is selected in [Image Shift] of printer driver.
To show the [Image Shift Screen], touch the [Image Shift]. Set the [Image Shift] on
the [Image Shift Screen]. To return to the [Printer Check Mode Screen], touch
[EXIT] on the [Image Shift Screen].
5.
Touch the [PROOF PRINT] to print one copied set for proofreading, if neces-
sary.
6.
Touch the [Exit] and then press [Start] to resume the rest of the print job.
How to check the job - Wait Mode - Wait with Proof
1.
Select Wait Mode - Wait with Proof in the printer property on your computer.
Select [Wait Mode] from the upper list of [Printer features] in [Device Options] tab
of the printer property and select [Wait with Proof] from the list "Change setting for"
by clicking the [ ] button of the lower box of the [Printer features].
2.
Start printing.
The [Printer Check Mode Screen] will appear on the LCD Touch Screen and one
set of copy for proofreading will be printed.
3.
Change setting values of [Print Quantity], [Duplex Mode] or [Image Shift], if
necessary.
(Refer to the above mentioned procedure : How to check the job - Wait Mode
- Wait with Proof, 4.)
4.
Touch the [PROOF PRINT] to print one copied set for proofreading, if neces-
sary.
5.
Touch [EXIT] and then press [Start] to resume the rest of the print job.
Chapter 4 Control Panel Setup
PS-1 (Printing System (1) PostScript option) 4-11
Advertisement
Table of Contents
Troubleshooting
