Printer Mode Basic Screen - Kyocera Vi7360 Instruction Handbook Manual

Printer Mode Basic Screen

When the Vi7360 + Printing System (1) + PS-1 system starts properly, the Printer Mode
Basic Screen is displayed on the LCD by pressing the [MODE] button.
When the [MODE] button is pressed again, the LCD is changed to the Copy Mode
Basic Screen, and the normal copy settings becomes available.
[Test Print]
Display the Test Print Setup Screen.
You can print the test print by selecting the item.
[Controller Set]
Display the Controller Set Screen.
You can perform various settings related to the Print Controller.
[Set Default]
Display the Set Default Screen.
You can select default values of various settings.
[PCL Setup]
Display the PCL Setup Screen.
You can perform various settings related to PCL.
Chapter 4 Control Panel Setup
PS-1 (Printing System (1) PostScript option) 4-9