Original Orientation - Kyocera TASKalfa 6550ci Operation Manual

Original Orientation

To send the document in the orientation that can be read properly, specify the upper orientation of the original .
To use the functions below, select the orientation in which the original is set on the platen.
• 2-sided/Book Original
• Border Erase
NOTE:
If [On] is selected as the Orientation Confirmation (page 9-16) setting in the System Menu, the
selection screen for original orientation appears when you select any of the above functions.
When placing the original on the platen
When placing the original on the document processor
Original [Top Edge on Top]
Original [Top Edge on Top]
[Top Edge on Left]
[Top Edge on Left]
6-12
Sending Functions