Basic Functions; Before Recording Operation - Panasonic D-snap SV-AV100 Operating Instructions Manual

Basic Functions
Before Recording operation
Do not cover the sensor with your hand when using the
Remote Control and recording pictures.
_Remote Control Sensor
@White Balance Sensor
• MPEG2/MPEG4 Motion Image
MPEG stands for Moving Picture Experts Group. It is
the name of the standard for the compression and
extension of a digital motion image and sound enacted
by ITU_TS (International Telecommunications Union-
Telecommunication Standardization Sector) and IS•
(International Standardization Organization).
The picture data is transferred at a rate of about
30 frames per 1 second under MPEG2 format.
Therefore, you can enjoy a beautiful and smooth
motion image.
The picture data of MPEG4 is inferior to those of
MPEG 2 in smoothness because the number of the
frames transferred in MPEG4 is less than that in
MPEG2. However, it is suitable for use in PC because
the transfer rate is higher.
• OSD Indication on LCD Monitor
This SD Video Camera can appear or disappear
indications on the LCD Monitor. (-_ 70)
1 Press the [REC/PLAY] Button to select
Recording Mode and set the operation
mode.
2 Press the [MENU] Button and select [OSD
Output] on [Display Setup] to [On] and
press the [1_ SET] Button.
eOSD Indications appears on LCD Monitor.
• If you select [Off] the OSD Indication which is limited
appears on LCD Monitor.
®
MPEG2 Oil
_{_ OhOOmOOs
R OhO5m
8:00PM
_B DEC Z O _004
MPEG2 Oil
8:00PM
DEC 20 2004
25