Panasonic D-snap SV-AV100 Operating Instructions Manual page 48

Program (MPEG2 Mode only)
Program refers to an assembly of scenes recorded on
the same date.
,Switching to Thumbnail Display of
Specific Date (Switch)
Since the scenes recorded on this SD Video Camera
are collected as "programs" for each recording date,
selecting a program will allow you to display only
scenes from a specific date.
oYou cannot record more than 99 programs on a card.
I Press the [MENU] Button and select
[Switch] on [Program] and press the
[1_ SET] Button.
2 Select the program to display and then
press the [1_ SET] Button.
oTo display scenes of all programs (all recorded
scenes), select [All programs].
,Playing Back Program (Play)
You can play back only the selected program.
/ Press the [MENU] Button and select
[Play] on [Program] and press the
[1_ SET] Button.
2 Select the program to play back and then
press the [1_ SET] Button.
oThe selected program will be played back from
the first scene. To cancel playback midway,press
the [11]Button.
48