Table of Contents
Advertisement
Camera Recording
Before you begin...
* Connect Camcorder to power source.
View recording scene on EVF or LCD
* Insert cassette with record tab (page 11).
(Liquid Crystal Display) monitor.
1 Press LCD-OPEN to unlock the LCD
monitor. Swing LCD monitor fully open
and adjust viewing angle.
* [f you want to record using EVF, close
and lock LCD monitor.
(PV-L621 shown)
CAUTION :
Rotating partially open LCD
monitor may block cassette door
and damage Camcorder body.
CAMERA position.
VISION
* EVF or LCD monitor turns on/off by the
ADJUSTMENT
POWER switch.
Built-in Twin
* EVF shuts off when LCD monitor is
Capsule 2-Way
opened and turns back on when LCD is
Microphone
closed.
* Both EVF and LCD monitor turn on
when LCD is at 180? (see above left).
This allows both you and the subject to
view the recording.
3 LCD
: Turn BRIGHT control to
monitor
adjust LCD monitor
brightness level.
EVF
: Look into EVF and adjust
VISION ADJUSTMENT to
your eyesight.
Hold down TAPE SPEED for about 1
Second to change tape speed to SP/SLP
5 Press RECORD/
É
PAUSE to start or
RECORD
pause recording.
Note:
6
* When Camcorder is aimed at excessively
Set POWER to
EVF or LCD Monitor
bright objects, or bright lights, a vertical
OFF when finished.
(Record mode)
bar may appear in the picture. This is
normal for the CCD pick-up. Try to avoid
• To remove the cassette, slide the ТАРЕ
this when possible.
EJECT switch (page 11).
* Using LCD monitor reduces battery
operation time. Return LCD monitor to
locked position when not in use.
1 6
For assistance, please call : 1-800-211-PANA(7262) or send e-mail to : consumerproductsO panasonic.com
Advertisement
Table of Contents
