properly. Do not take the used cartridge apart or try to refill
it.
q
ink does get on
If
and water.
with water.
new cartridge.
Note:
When you replace the cartridge, the printer will not recharge the
the prirzter performs
up to 40 seconds to complete.
Cleaning the Print Head
If print quality diminishes, use the printer's built-in print-head
cleaning cycle to ensure that the nozzles are delivering ink
properly. To avoid wasting ink, clean the print head only if
print quality declines.
Follow these steps:
on. If the Pause light is not on, press the Pause button to
pause the printer.
two seconds.
The cleaning cycle takes about 40 seconds. The Pause light
flashes throughout the cycle and then stays on when the
cleaning cycle is finished.
hands, wash them thoroughly with soap
your
ink gets
your eyes,flush them immediately
into
normal maintenance
Maintenance and Troubleshooting 3-3
This can take
procedures.
ink