Printing - Epson Stylus 800 Series User Manual

Plug another electrical device into the outlet to determine
whether it is working.
The lights come on briefly but then go off and stay off.
Check that the printer's voltage rating matches the voltage of
your electrical outlet. If the voltages do not match, unplug the
printer and contact your dealer immediately. Do not reconnect
the power cord to an electrical outlet.
All lights on the control panel are on but nothing prints.
Contact your dealer.
Printing stops and the printer beeps five times.
A carriage error occurred. Turn off the printer. After a few
seconds turn it on again.
Ink Out
The light flashes.
The ink cartridge is almost out of ink. Get ready to replace the
ink cartridge.
Ink Out
The light is on and the printer beeps three times; the printer
does not mint.
The ink cartridge may be empty, or not installed at all. Replace
the ink cartridge with a new one.
Printing stops and the
Printing was temporarily suspended. Press the Pause button to
continue.
3-6 Maintenance and Troubleshooting
Pause
light is on.